Перевод

English German Russian Ukrainian

Все Категории

Партнеры

Загрузка...
Загрузка...
Главная

Marantz PM-14S1 Reference Series Integrated Amplifier

« Вернуться к результатам поиска | Размещен в категории: Consumer Electronics » TV, Video & Home Audio » Home Audio Stereos, Components » Amplifiers & Preamps

Номер товара: 142373608775
Продавец: cermine1 (12) 100.0% позитивных отзывов
Товар из: Haslet, Texas, US

Посмотреть товар на eBay

Аукцион закончился.
 

Краткое описание товара

This is a like-new Marantz PM-14S1 Reference Series two-channel amp. The amp itself is in excellent condition with no visible blemishes, no performance issues, and has only been lightly used. Comes with the original remove control, which is totally functional but had some damage when it was shipped to me (cosmetic only as far as have seen). Flat $50 shipping cost to the continental US. Below are the features and spec of this amp: - Current Feedback technology provides wide range, very fast and accurate signal handling. - Marantz proprietary HDAM SA2 and SA3 modules and discrete audio circuitry - Full discrete power amplifier with V/I Servo (90W 8 ohms 20Hz - 20kHz, 140W 4 ohms 20Hz - 20kHz) - Robust, high-speed power supply with blocking capacitors and large-capacity Schottky Barrier Diodes. Constant Current Feedback (C.C.FB) MM/MC phono equalizer. - Newly designed Marantz original high quality / high-purity copper speaker terminals (SPKT-100) -90 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.05% THD -140 watts x 2 channels into 4 ohms (20-20,000 Hz) -current feedback amplification circuit for accurate, natural sound at all volume levels -Marantz's Hyper Dynamic Amplifier Module (HDAM-SA3) offers exquisite detail and dynamic range while reducing noise -frequency response: 5-100,000 Hz (±3dB) -signal-to-noise ratio: 106dB line, 86dB phono (MM), 75dB phono (MC) -massive toroidal transformer wound with oxygen-free copper -rigid chassis with double-bottom plate and aluminum die-cast feet to minimize vibration -6 RCA audio inputs (includes phono input for moving magnet and moving coil cartridges) -phono section features constant current feedback gain stage for flawless musical reproduction from your vinyl recordings -Power Amp Direct inputs for use with a separate preamp or A/V receiver with Front L/R preamp outputs -stereo RCA preamp outputs -2 sets of stereo RCA recording outputs -high-purity copper binding-post speaker connectors -biamp/stereo switch lets you biamp your speakers using two PM-14S1's for even higher-fidelity sound -full-size headphone output -remote control -detachable power cable -17-5/16"W x 4-7/8"H x 18-11/16"D -Weight: 40.8 lbs.

Детальное описание товара

eBay
This is a like-new Marantz PM-14S1 Reference Series two-channel amp.  The amp itself is in excellent condition with no visible blemishes, no performance issues, and has only been lightly used.  Comes with the original remove control, which is totally functional but had some damage when it was shipped to me (cosmetic only as far as have seen).

Flat $50 shipping cost to the continental US.

Below are the features and spec of this amp:


- Current Feedback technology provides wide range, very fast and accurate signal handling.
- Marantz proprietary HDAM SA2 and SA3 modules and discrete audio circuitry
- Full discrete power amplifier with V/I Servo (90W 8 ohms 20Hz - 20kHz, 140W 4 ohms 20Hz - 20kHz)
- Robust, high-speed power supply with blocking capacitors and large-capacity Schottky Barrier Diodes. Constant Current Feedback (C.C.FB) MM/MC phono equalizer.
- Newly designed Marantz original high quality / high-purity copper speaker terminals (SPKT-100)

-90 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.05% THD
-140 watts x 2 channels into 4 ohms (20-20,000 Hz)
-current feedback amplification circuit for accurate, natural sound at all volume levels
-Marantz's Hyper Dynamic Amplifier Module (HDAM-SA3) offers exquisite detail and dynamic range while reducing noise
-frequency response: 5-100,000 Hz (±3dB)
-signal-to-noise ratio: 106dB line, 86dB phono (MM), 75dB phono (MC)
-massive toroidal transformer wound with oxygen-free copper
-rigid chassis with double-bottom plate and aluminum die-cast feet to minimize vibration
-6 RCA audio inputs (includes phono input for moving magnet and moving coil cartridges)
-phono section features constant current feedback gain stage for flawless musical reproduction from your vinyl recordings
-Power Amp Direct inputs for use with a separate preamp or A/V receiver with Front L/R preamp outputs
-stereo RCA preamp outputs
-2 sets of stereo RCA recording outputs
-high-purity copper binding-post speaker connectors
-biamp/stereo switch lets you biamp your speakers using two PM-14S1's for even higher-fidelity sound
-full-size headphone output
-remote control
-detachable power cable
-17-5/16"W x 4-7/8"H x 18-11/16"D
-Weight: 40.8 lbs.


« Вернуться к результатам поиска

Загрузка...